Construction Vibratory Plate Compactor

Product Description

Vibrate Plate Compactor - PC1614-50

With our immense domain expertise, we are engaged in offering a wide range of Asphalt Vibratory Plate Compactor. Oil sensor facility provided with the engine helps in keeping engine cool, clear and lubricated. Our offered Asphalt Vibratory Plate Compactor is highly demanded in the market for its extensive application in vehicles. The offered engine monitors crankcase oil level and mechanically barricades the engine prior an oil related failure occurs. These engines may also be fitted with a warning light offering a visual display of low oil condition.

Features:

Description :

5.5 HP Honda Gasoline engine incl. cage.

CE DECLARATION OF CONFORMITY

We hereby declare that the equipment described below conforms to the relevant fundamental safety and health requirements of the appropriate CE Directives, both in its basic design and construction. This declaration will cease to be valid if any modifications are made to the machine without our expressed approval.

Product : Vibratory Plate Compactors : PC1614-40 ; PC1614-50

The said product has been sound tested per Directive 2000/14/EC

Relevant CE Machinery Safety Directives : 2006/42/EC, 2004/108/EC, EN500-1, EN500-4, 2000/14/EC

Appropriate internal measures have been taken to ensure that series-production units conform at all times to the requirements of current CE Directives and relevant standards.

The signatories are empowered to represent and act on behalf of the companys management.

Safety Instruction :

SAFETY INFORMATION LABEL LOCATIONS :

Technical Specifications :

The above noise level and vibration values were determined at normal speed of the engine.

During operation these values may differ because of the actual operational conditions.

Dimensions :

PC1614-40

PC1614-50

Transport to Work Site :

Instruction For Lifting Machine:

OPERATION:

ENGINE CHECK BEFORE STARTING

Operating The Machine

IMPORTANT ADVICE :

The manufacturer declines all responsibility for loss or damage resulting from misuse or any modification or alteration that does not conform to the manufacturers original specifications. At the workstation, the sound pressure level may exceed 85 db (A). In this case individual protection measures must be taken

Spare Parts Ordering :

When ordering spare parts, please mention machine serial no., part no. and description.

Scrapping :

In the event of deterioration and scrapping of the machine, the following items must be disposed of in accordance with the requirements of the legislation in force.

Main Materials:

The instructions for use and spare parts found in this document are for information only and are not binding. As part of our product quality improvement policy, we reserve the right to make any and all technical modifications without prior notice.

Maintenance Schedule :

Check all external screw connections for tight fit approx. 8 hours after first operation.

Maintenance :

• Perform maintenance work on engine according manufacturer's instructions.
• Check belt tightness and tighten if necessary. Belts should be move 10 -15 mm when pushed by the thumb.
• Check and retighten bolts and nuts.
• Apply grease to the 4 grease nipples on the spider block.

INSTRUCTIONS FOR ORDERING

• Please State Machine Details in the Following Sequence:
• Machine Serial Number
• Part Number, Description and Quantity of Parts
• Full Delivery Address

Manufacturers Liability and the Use of Genuine Spare Parts

Liability for this machine is accepted only when the machine is defective from the outset. Liability is reduced or nullified in the event that the user fails to comply with the operating and maintenance instructions and uses spare parts which are not guaranteed.